You can check the status of each component in the assembly and update several columns with the Refresh Teamcenter Information command in the Assembly Navigator. Right-click a column to access the command and update the following columns: Proe网 ugproe.com
-
TC Information 模具网 ugproe.com
-
Checked Out By
模具网 ugproe.com
-
Status
中国模具视频网 -
Modifiable
中国模具视频网
-
Read-only
模具网 ugproe.com
-
Projects
Proe网 ugproe.com
-
Precise Structure
Proe网 ugproe.com
Note: 中国模具视频网
The Update Precise Structure command is replaced with the Refresh Teamcenter Information command. Proe网 ugproe.com
If you have modified a part that has also been modified by another user, you are prompted with an informational message. Proe网 ugproe.com
|
Application 中国模具视频网 |
Teamcenter Integration UG网，首选ugproe.com |
|
Resource bar Proe网 ugproe.com
|
Assembly Navigator→right-click on a column Proe网 ugproe.com |
The configuration of columns in Teamcenter Navigator and Assembly Navigator may become modified, as required. You can now reset the columns to revert back to the default state with the Reset to Default button on the configuration dialog.
Proe网 ugproe.com
The default is defined by the preferences that control configuration of columns, such as the Teamcenter preference TC_NX_TCNavigator_Column_Config. If no column preferences are defined, then the default is the configuration that is delivered with NX.
中国模具视频网
|
Application 中国模具视频网
|
Teamcenter Integration Proe网 ugproe.com |
|
Resource bar 模具网 ugproe.com |
Teamcenter Navigator and Assembly Navigator 模具网 ugproe.com |
You can specify the quantity of a component in an assembly by entering the number in the Quantity box on the Assembly page.
A Quantity Type list is also provided on the Assembly page that lets you select As Required (A/R) or Number to specify the quantity in the Quantity box. UG网，首选ugproe.com
Note: Proe网 ugproe.com
If a unit of measure (UOM) is defined for the item, the quantity is a real number. If no UOM is defined, the quantity is an integer. 中国模具视频网
You can enter the quantity of an item for an assembly.
|
Application UG网，首选ugproe.com |
Teamcenter Integration 中国模具视频网
|
|
Resource bar UG网，首选ugproe.com
|
Assembly Navigator→right-click a component and choose Properties UG网，首选ugproe.com |
|
Location in dialog box 模具网 ugproe.com
|
Component Properties dialog box→Assembly page→Quantity box 模具网 ugproe.com |
From the Reopen Part dialog box, you can now reopen parts you already have open that were modified by other users. UG网，首选ugproe.com
When you select the List Parts Modified by Other Users checkbox, the following is applicable:
中国模具视频网
-
Parts that were modified by other users since you opened them in the current session are listed.
UG网，首选ugproe.comNote: 中国模具视频网
Parts that are modified but have not been loaded are not listed. 中国模具视频网
-
Parts that are partially loaded are listed.
Proe网 ugproe.com -
Users that have modified the part are listed in the Modified By column. 中国模具视频网
-
The Reopen All Parts button closes and reopens all parts that have been modified.
中国模具视频网
|
Application UG网，首选ugproe.com |
Modeling 中国模具视频网 |
|
Menu 模具网 ugproe.com |
File→Close→Reopen Selected Parts 中国模具视频网 |
