The What's New Guide briefly summarizes the new features in each release.
模具网 ugproe.com
This guide highlights what each function does, why it should be used, and where it can be found in the user interface. This guide also conveys the benefit of each new capability. UG网，首选ugproe.com
New features are also introduced in NX Maintenance Releases between major releases. To review enhancements that were introduced since the last major release of NX, refer to the various maintenance release What's New Guides available from the What's New Guide launch page. UG网，首选ugproe.com
Non-geometric components (NGC) are now available in NX assemblies and can be displayed in Assembly Navigator. The assembly structure shown in the Assembly Navigator can now match what is shown in the drawing parts list and Teamcenter PSE. Proe网 ugproe.com
An NGC does not need to have a dataset. If the item has a unit of measure defined, it is considered an NGC when the component is added to NX. 模具网 ugproe.com
You can designate any component as non-geometric on the Assembly page of the Component Properties dialog box. Once you do this, the component is no longer displayed in the NX graphics window. UG网，首选ugproe.com
You can control whether you see NGCs in the Assembly Navigator by right-clicking and choosing the Include Non-Geometric Components filter.
中国模具视频网
中国模具视频网
The following also apply: 中国模具视频网
-
You cannot make an NGC the displayed part or the work part. 模具网 ugproe.com
-
Many assembly commands are not valid for use with an NGC and are blocked.
Proe网 ugproe.com -
You cannot set an NGC as a reference-only component.
Proe网 ugproe.com
-
When a parts list is created, the NGC items are also included in the parts list.
Proe网 ugproe.com
You can more accurately control the assembly structure and attribute values of an assembly in NX. 中国模具视频网
|
Application 中国模具视频网 |
Teamcenter Integration 中国模具视频网 |
|
Resource bar Proe网 ugproe.com
|
Assembly Navigator Proe网 ugproe.com
|
Parts list
中国模具视频网
The parts list functionality is enhanced to provide robustness and simplified and consistent user interaction.
Proe网 ugproe.com
The underlying design of the parts list has been modified so that the parts list always reflects the changes made in Teamcenter PSE and the Assembly Navigator, but changes made in the parts list are no longer reflected in the assembly structure in the Assembly Navigator or Teamcenter PSE.
Changes you make in the parts list are considered local changes in the Drafting application. When a cell for an item in the parts list is changed, such as quantity, the quantity is not changed in the Assembly Navigator or Teamcenter.
Proe网 ugproe.com
Also, the assembly structure in the parts list is locked to prevent changes. The structure in the Assembly Navigator must be updated to get a corresponding change in the parts list.
Specific cells in the parts list can be locked so they cannot be modified and the parts list setup can also be locked so it cannot be modified. 模具网 ugproe.com
Note: UG网，首选ugproe.com
The Callout column in the parts list is a key field by default and corresponds to the sequence number in Teamcenter PSE. It is recommended that you change the Teamcenter preference PS_new_seqno_mode to existing. If you do not change this preference, turn off the Callout column as a key field. This will allow similar items to pack (by part number) in the parts list. Proe网 ugproe.com
You have more control over the parts list and can modify the parts list to reflect the specifics of the drawing. 中国模具视频网
|
Application Proe网 ugproe.com |
Teamcenter Integration and Drawing 模具网 ugproe.com |
|
Resource bar Proe网 ugproe.com
|
Assembly Navigator 中国模具视频网 |
|
Menu Proe网 ugproe.com
|
Insert→Parts List 模具网 ugproe.com |
Additional columns are added to the Assembly Navigator to provide more information about the status, history, and state of an item. The following new columns are added:
Proe网 ugproe.com
|
TC Information Proe网 ugproe.com |
This column indicates when a subassembly or component has been updated by another user. When a new version or revision is available, a warning icon is displayed in the column for that part even if you already have the item opened in the session. If you have the latest version, the column is blank. 中国模具视频网
Tooltips are provided that let you know if a new version or revision exists, or if the BVR for an assembly has been modified. It also states the user that updated the item. For example: 中国模具视频网
If a node in the Assembly Navigator is unloaded, the column shows out of date for a newer revision. It does not show that for a newer version since only the latest version would be loaded. You can update the status for a displayed assembly with the Refresh Teamcenter Information command. 模具网 ugproe.com |
|
Checked Out By UG网，首选ugproe.com |
This column shows who has the component checked out. It shows the user of the session if that is who has checked out the component. If the component is checked in, the column is blank. 中国模具视频网
|
|
Projects 模具网 ugproe.com |
This column lists the projects to which the Item Revision is assigned. 模具网 ugproe.com |
|
Status Proe网 ugproe.com |
This column shows the current status assigned to the Teamcenter dataset. If more than one status is assigned, they are all listed. If it has no status, the column is blank. 模具网 ugproe.com |
|
Modifiable 模具网 ugproe.com |
This column uses the information contained in other columns to determine whether you have write access to the part. A checkmark icon, none icon, or question mark icon indicates whether you are able to modify the part. If the part is not modifiable, a tool tip explaining the reason is provided. The following columns are used as input: 中国模具视频网
|
|
Quantity Proe网 ugproe.com |
This column provides the quantity of the item within the assembly. 中国模具视频网
|
|
Application 中国模具视频网
|
Teamcenter Integration Proe网 ugproe.com
|
|
Resource bar Proe网 ugproe.com |
Assembly Navigator 模具网 ugproe.com
|
