Escape------根目录ROOT
Space-----工具条向上翻页Page the Toolbar Up
Page Up-----工具条向上翻页Page the Toolbar Up
Insert-----删除指定图层内的图素Delete selected entities
Delete-----删除选取的图素Dlete selected entities
0------缩放图素所有轴向的大小Transform using Scale Applide to All Axes
1-----单边修剪线Trim an entity to another entity
2-----定点修剪线Trim an entity to a point
3-----定点打断线Break an entity to a pointy
4-----作弧的指令列表Create an arc
5-----轴移的指令列表Transform using Delta
6-----点移的指令列表Transform using Old To New
7-----旋转的指令列表Transform using Rotate
8-----镜射的指令列表Transform using Mirror
9-----投影的指令列表Transform using Project Normal to a Plane
A-----单线作面Create Tabcy1 surface by extruding a between two curves
B-----连接两线Create a sp1ine that blends the gap between two curves
C-----大面作小面Truncate a surface to a smaller rectangular region
模具网 ugproe.com
D----- 重建面Refit any surface to a bi-cubic type
E-----延伸面Extend an untrimmed surface along an edge
F----- 面倒等比R角面貌一新Create Fillet surface between two intersecting surfaces
G-----恢愎修剪后Retrim a surface that was previors1y untrimmed
H-----水平线段Create a horizontal line
I------求面与面的交线Create sp1ines at the intersections of surfaces
J------一组线作面Create Surface by skinning through curves
K-----三或四线作面Create Surface from three or four edges
L-----恢愎修剪前Untrim a surface
M-----网格线作面Create Surface through a mesh of curves
N------改变面的显示架构Change surf display(flowlines vs.patch boundaries)
O------垂直相切实可行Create a line perpendicular to first,onto a surface
P------投影线至面Create splines by projecting curves onto a surface
Q------作线的指令列表Create a line
R------面倒不等比R角面Create Fillet surface based on spine curve
S------接合线Create a spline by chaining one or more curves together 中国模具视频网
T------修剪面Trim a surface to curves or other surfaces[1]
U------打断面Break a surface along an iso-curve[2]
V------垂直线断Create a vertical line
W-----方向与形状作面Create Surface by sweeping curves along curves
X------偏移线Create a spline offset from another curve
Y------改变线的方向Reverse the direction of a spline
Z-----偏移面Create a spline offset from another curve
F1-----Menu1
F2-----Menu2
F3-----Menu3
F4-----Menu4
F5-----Menu5
F6-----Menu6
F7-----Menu7
F8-----Menu8
F9-----Menu9
F10-----上一菜单Backup
F11-----调线的节点Edit a spline
F12-----移动物体至指定图层Move entities from one level to another
Shift+1------单边打断线Break an entity to another entity
Shift+N-----输入零件档Import a CADKEY Pattern file
Shift+P------输出零件档Export a CADKEY Pattern file
Shift+O------转变折线为曲线Create a spline by interpolating the nodes of a Polyline
Shift+F1-----帮助Display Help for a command item or screen region
模具网 ugproe.com
Ctrl+1------创作面Create Surfaces
Ctrl+2------编辑面Modify a Surface
Ctrl+3-------编辑线Modift a spline
Ctrl+4------创作线Create Spline
Ctrl+A------改变箭头方向Toggle arrow switch
Ctrl+C------愎制图素至剪贴簿Copy the selection and put it on the Clipboard
Ctrl+D------修改工作平面深度Set the construction depth
Ctrl+E------读取聚集指令档Play macro
Ctrl+F------档案存储Save the active part file
Ctrl+G-----网格点设定Set Grid and Snap Attributes
Ctrl+I------计算器On-line calculator
Ctrl+J------记录成聚集指令Start recording macro
Ctrl+K-----暂停记录聚集指令Pause macro recording
Ctrl+L-----设定当前工作层Change the active level to create entities on
Ctrl+N-----等角视图尺寸Display isometric dimensions
Ctrl+P-----列印出图Print/Plot the current part
Ctrl+Q----单选删除Delete single entity
Ctrl+R-----清屏Redraw the part
Ctrl+S-----档案存储Save the active part file
Ctrl+T-----游标追踪Turn the cursor tracking display on or off Proe网 ugproe.com
Ctrl+U-----救回单一删除图素Recall the last entity deleted
Ctrl+V-----设定座标细统Set VW/WLD mode
Ctrl+W----设定工作模式Set 2D/3D Construction Mode
Ctrl+X-----网格点设定Set Grid and Snap Attributes
Ctrl+Z-----编修视图Modify instance attributes
Ctrl+Shift+R----书面再生Regenerate display
Ctrl+Shift+V-----旋转座标轴List all the levels in the part
Alt+1------图层清单List all the levels in the part
Alt+2-----变更属性Change an entity,s attributes
Alt+3-----从曲线上建构切线向量Create tangent vectors from curves
Alt+4----改变面的方向Recall the direction of surface normals
Alt+5----相互修剪Trim two entities to each other
Alt+A----图素全屏Autoscale the part
Alt+B----显示前一书面Recall the last viewing window
Alt+C----建构倒角Create a fillet
Alt+D-----放大一倍Scale the part up two tines
Alt+E-----创建点Create a point
Alt+H-----画面缩小一倍Scale the part down by half
Alt+I-----愎原Undo last command
Alt+J-----建构参数曲线Create a spline UG网，首选ugproe.com
Alt+K----定义工作座标Define a construction view
Alt+L-----定义直线极限模式Set the line limit switch
Alt+M-----图素筛选Set the entity selection mask
Alt+N-----图层筛选Set level selection masking
Alt+O-----创建圆Create a circle
Alt+P-----画面平移Pan the part
Alt+Q-----画面缩小一倍Scale the part down by half
Alt+R-----切换资料搜寻方向Toggle database search
Alt+S-----缩放画面至指定比例Scale the part and select a new center
Alt+T-----设定线形Set the default entity line style
Alt+V-----切换观察视面Set or change 3Ddisplay view in a viewport
Alt+W-----框选放大Zoom in by selecting the new window corners
Alt+X----- 设定预定的图素颜色Set the default entity color
Alt+Y-----设定线宽Set the default entity color
Alt+Z-----设定预定的图素参数Set the default entity attributes
Alt+Shift+K-----切换显示图纸边界Toggle paper border
Alt+Shift+V------指定轴心旋转视角Rotate part dynamic [3]
Ctrl[4]+Alt+I-----IGS输出Write surfaces to an IGES file Proe网 ugproe.com
Ctrl+Alt+Y----IGS输入Read surfaces from an IGES file
