<?xml version="1.0" encoding="gb2312"?>
<rss version="2.0">
  <channel>
    <title>CAXA</title>
    <link>http://www.ugproe.com/article/soft/sj/caxa/</link>
    <description>Latest 50 infos of CAXA</description>
    <copyright>Copyright(C) Empire CMS</copyright>
    <generator>Empire CMS by Empire Studio.</generator>
    <lastBuildDate>Wed, 08 Sep 2010 18:42:09 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.ugproe.com/e/data/images/rss.gif</url>
      <title>中国模具视频网</title>
      <link>http://www.ugproe.com/</link>
    </image>
    <item>
      <title><![CDATA[使用CAXA制作实体椭球]]></title>
      <description><![CDATA[ 1.拉入一长方体，设置大小为：100,80,60。 2.以任一个顶点为中心，拉入三个椭圆，长短圆分别与长方体的边长相等。选中相交的边，点右键，转换成3D曲线。 3.利用曲面功能中的边界，选中三条3D曲线，做成一曲面。 4.先 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/925.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/925.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 14:49:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[用旋转特征制作烟灰缸]]></title>
      <description><![CDATA[ 1.用旋转特征编辑曲线，选360度，曲面。做烟灰缸盖外形。记住外形直径。2　确定成型3。用旋转特征编辑曲线，做一个直径是14的圆管曲面，放在刚才成型体上平面的适当位置上，拷贝成3个，再一起往上拷贝。记住往上拷贝 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/924.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/924.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 14:18:45 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[IGES文件的转换]]></title>
      <description><![CDATA[ CAXA实体设计的.ics文件与IGES文件转换时，方法如下：在实体设计中输出IGES文件：打开.ics文件，是零件处于选中状态（边缘为黄色加亮），然后点击文件——输出——零件，选择.igs 后缀保存，然后会出现如下对话框：按 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/923.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/923.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:25:34 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA 电子图板使用心得分享]]></title>
      <description><![CDATA[ 我应用CAXA电子图板已经四年了,在这四年里我分别用过CAXA电子图板V2, CAXA电子图板XP, CAXA电子图板2005, CAXA电子图板2007.给我最大的感觉就是CAXA应用非常的方便,作图效率高,速度快，是别的软件无法比拟的。特别是 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/922.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/922.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:24:32 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA正常安装为什么运行软件后提示错误]]></title>
      <description><![CDATA[ 该台计算机可能以往装过CAXASOLID或ironcad。处理办法：1.运用查找，如找到ironcad.tbc删除。2.如果没有ironcad.tbc或删除后，仍有问题的化，尝试，卸载CAXASOLID,
3.检查hkey_local_machine和hkey_current_user下的 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/921.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/921.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:23:11 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[怎样又快又好地运用CAXA]]></title>
      <description><![CDATA[ 虽说计算机辅助设计系统（CAD）只是对设计人员的一种辅助，要是运用得当，的确能使图形的精确性有很大的提高，同时也使工作速度有成倍的加快。这又精又快的效果是手工画法不能比拟的。仅从个人使用CAXA的体会，绘图时 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/920.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/920.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:22:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CXAX使用过程中菜单、工具条丢失的解决办法]]></title>
      <description><![CDATA[ 现象：电子图板在作图状态下工具栏、主菜单、立即菜单和状态栏全部丢失以后，在作图状态下无法还原。解决：1． 用F9键切换到全屏状态，在“全屏显示”按钮上单击鼠标右键选择自定义，弹出自定义对话框后，关闭。 2． ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/919.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/919.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:21:49 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA的复制功能的使用]]></title>
      <description><![CDATA[ 我应用CAXA电子图板已经四年了，在这四年里我分别用过电子图板V2、电子图板 XP、电子图板2005、电子图板 2007.给我最大的感觉就是CAXA电子图板应用非常的方便,作图效率高,速度快，是别的软件无法比拟的。特别是像阶梯 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/918.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/918.html</guid>
      <category>CAXA</category>
      <author><![CDATA[朱见广]]></author>
      <pubDate>Fri, 03 Apr 2009 07:19:59 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA使用经验谈问答]]></title>
      <description><![CDATA[ 如何确定三维坐标！  
      内容: 三维电子图板的三维坐标是如何确定的呢？（1，2，3）这三个坐标中，是不是分别固定的代表X，Y，z值呢？还是根据选择的平面不同，这三个数值所对应的坐标会相应发生改变呢？   
  ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/917.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/917.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:18:39 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA使用技巧 - 新增图素入库]]></title>
      <description><![CDATA[ 在设计元素库中添加新元素按以下方法操作：     1．若需要新建一个设计元素库，在工具菜单中点击设计元素——新建，在设计元素库的显示条中即会出现刚建成的“设计元素1”；    2．点击设计元素——保存，会出现保存 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/916.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/916.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:17:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA另类技巧]]></title>
      <description><![CDATA[ 1、 Caxa电子图板中图框、标题栏调用对话框空白怎么办？
    这种现象一般是因为在同一台计算机上，对软件多次安装、卸载操作，导致相关注册表信息混乱造成的。我们可以用以下方法解决：
    1） 确定电子图板软件 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/915.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/915.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:17:10 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[对CAXA实体设计的认识]]></title>
      <description><![CDATA[ 下面依次从零件设计、装配设计、渲染动画及设计元素库、三维球、包围盒的用法等方面谈谈我的感受。 
CAD软件作为一种辅助设计工具，越容易学习、容易使用的就越好。CAXA 实体设计采用拖放图素的方式设计，就如同搭积 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/914.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/914.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:15:41 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA软件不能自注册问题的解决方法]]></title>
      <description><![CDATA[ 在安装CAXA系列软件时，会出现安装到最后阶段CAXAInfo.dll以及Caxaview.ocx提示无法自注册。这是由于以前安装CAXA软件，卸载后在注册表里残留了注册信息所致。对于该问题我们需要手动进行注册，具体操作步骤如下：单 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/913.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/913.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 07:09:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[实体设计对图素进行双向对称拖放有哪些方法]]></title>
      <description><![CDATA[ 方法一：按住Ctrl键把对称的两个手柄同时选中编辑即可

方法二：右键点击一个智能手柄选择编辑包围盒，不编辑这个手柄方向的数值而编辑另外两个方向的数值，这两个方向就是双向对称拖放。

方法三：在图素智能状 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/912.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/912.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:58:48 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[在Caxa中插入Word文档]]></title>
      <description><![CDATA[ 由于用户在使用Caxa电子图板绘制图纸过程中，有时需要给出设计零件或模具的参数表，笔者根据使用Caxa电子图板经验，在Caxa电子图板中插入Word文档有三种方法：比较看来，第二种方法比较优越 1、 第二种方法是：在Cax ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/911.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/911.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:55:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[用CAXA电子图板巧绘地形图]]></title>
      <description><![CDATA[ 一些专业测绘部门都有专用的测绘软件绘制地形图，但当某些没有专用测绘软件而又需要绘制地形图的情况下，可以使用CAXA电子图板巧绘地形图。 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/910.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/910.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:54:48 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA在异型材及门窗设计中的应用]]></title>
      <description><![CDATA[ 新疆屯河型材有限公司在短短的一年内，以CAXA实体设计软件为主的制造业信息化三维CAD软件应用取得成果。  

    一、企业的基本情况 
    新疆屯河型材有限公司是新疆屯河工贸（集团）有限公司下属的以生产PVC异型 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/909.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/909.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:53:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[从平民化的CAXA实体设计看三维CAD的普及]]></title>
      <description><![CDATA[ 开发平台——从二维转向三维——正逢其时 

“甩图板”工程让我们接受了二维CAD系统，它帮助工程师们轻松地画出规范、漂亮的图纸，提高了绘图效率，并使图纸的修改和管理更方便，也改善了“面朝图板背朝天”的工作 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/908.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/908.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:50:55 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[利用CAXA制造工程师制作扳手组件模型]]></title>
      <description><![CDATA[ CAXA制造工程师2004是一个国产的CAD/CAM软件，以其强大的造型功能和加工功能备受广大用户的赞誉 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/907.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/907.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:48:09 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA网络DNC在西安科耐特的成功实施]]></title>
      <description><![CDATA[ 1、企业背景    西安科耐特科技有限公司是一家民营生产企业，主要研制生产各种高品质的射频同轴连接器及其它微波器件。部分产品现已出口美国、澳大利亚、以色列、加拿大、中东、东南亚、及欧洲等国家。诸多国内外知名 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/906.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/906.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:46:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[WPS汉字输入方式在CAXA电子图板上的应用]]></title>
      <description><![CDATA[ CAXA电子图板是自主开发的一种操作简单、功能齐全、具有智能化工程标注特点的计算机辅助绘图系统，但在文字标注功能的开发上却没有涉及到常用的一种汉字输入方式??五笔字型输入法。为此笔者在长期实践的基础上，成功 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/905.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/905.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:44:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[应用CAXA线切割进行数控加工自动编程]]></title>
      <description><![CDATA[ CAXA线切割是一个面向线切割机床数控编程的软件系统，在我国线切割加工领域有广泛的应用。它可以为各种线切割机床提供快速、高效率、高品质的数控编程代码，极大地简化数控编程人员的工作。CAXA线切割可以快速、准确 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/904.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/904.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:43:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA制造工程师应用中的几个疑点探析]]></title>
      <description><![CDATA[ 本文就CAXA制造工程师应用中筋板生成、草图环不封闭、导动加工轨迹生成时遇到的一些疑难问题产生的原因及其解决办法进行了分析探讨。 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/903.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/903.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:07:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[用CAXA实体设计制作角度零件及工装]]></title>
      <description><![CDATA[ 用CAD软件CAXA实体设计制作有多个空间角度的零件及其工装方便容易,通过测量造型实体的相关尺寸就得到所需的设计结果.因而该软件非常适于零件及工装的设计。 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/902.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/902.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:06:42 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA软件在电工行业的应用]]></title>
      <description><![CDATA[ 本文介绍了阳泉电工机械有限责任公司如何运用现代信息技术逐步对传统的设计、生产、管理、经营体制进行改造，提高企业的设计实力和市场竞争能力，使在竞争中立于不败之地。 


    阳泉电工机械有限责任公司是生产 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/901.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/901.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:06:03 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA-PDM在模具制造企业中的应用]]></title>
      <description><![CDATA[ 总 序 

PDM（产品数据管理）是随着CAD/CAM的应用发展起来的一项技术。传统的PDM重点管理设计阶段的产品相关数据，尤其是几何和图形数据。但是随着应用的不断深入和发展，以及制造业信息化的推进 ，PDM技术和产品已 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/900.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/900.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:05:06 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA实体设计在液压挖掘机设计开发中的应用]]></title>
      <description><![CDATA[ 玉柴工程机械公司是中国最大的小型工程机械生产基地和出口基地。出口创汇产品YW1.3、WY2.5、WY3.5等系列液压挖掘机是填补国内空白的高科技产品，畅销欧洲、北美等20多个国家和地区，出口创汇额1000万美元以上。 
　 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/899.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/899.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:04:33 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[怎样又快又好的运用CAXA]]></title>
      <description><![CDATA[ 虽说计算机辅助设计系统（CAD）只是对设计人员的一种辅助，要是运用得当，的确能使图形的精确性有很大的提高，同时也使工作速度有成倍的加快。这又精又快的效果是手工画法不能比拟的。仅从个人使用CAXA的体会，绘图时 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/898.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/898.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:03:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA-V2线切割软件在DK7725e线切割机床上的应用]]></title>
      <description><![CDATA[ 目前我国有大量的装有早期操作系统的数控设备，如何对其进行升级使这些设备重新焕发青春是摆在大家面前的一个很重要的问题。本文所介绍的正是这样的一个实例，文中所叙述的内容不仅对同类设备的改造具有现实意义，而且对其他类似设备的升级也有一定的借鉴作用。 
 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/897.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/897.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 06:01:54 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA制造工程师在数控加工制造中的应用]]></title>
      <description><![CDATA[ CAXA制造工程师是一款优秀的国产数控加工软件，随着软件知名度的提高，在国内的用户群与日俱增。为了推动国产软件的应用，也为了使大家尽快对CAXA制造工程师有一个清晰的了解，我们选择了本篇文章。本文介绍了CAXA制造工程师在数控加工制造中应用的具体步骤，图文并茂，可读性较好。

 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/896.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/896.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:59:06 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA三维一瞥——花瓶]]></title>
      <description><![CDATA[  CAXA三维从“体”开始、并作元素的加减拖移，“搭积木”比较接近人的自然的认知方式和设计方式。     当然，如果你已经习惯了抽象的点、线、面的画法几何投影绘图，也可以从绘制草图再作拉伸、旋转、放样等等生成三 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/895.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/895.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:55:27 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[论CAXA电子图版与AutoCAD两款软件的的优确点]]></title>
      <description><![CDATA[  AutoCAD与CAXA电子图版都是绘图软件，CAXA电子图版发现的确是有CAD所不能比的优点，但是感觉没有CAD那么灵活。     CAXA电子图版能转换成AutoCAD图形格式 遗憾的是转换后 ∮符号变成了%C 这主要是两个软件的∮符号的 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/894.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/894.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:51:29 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA实体设计2006实现CAD/CAE无缝集成]]></title>
      <description><![CDATA[ 为了满足用户对CAE的需求，CAXA实体设计2006为用户免费提供了集成的有限元分析模块ALGOR。凡是CAXA实体设计2006的用户，均可免费获得世界著名的大型通用工程仿真软件ALGOR DesignCheck模块，经注册，用户可以在一年有 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/893.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/893.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:50:26 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA电子图板2005R2文本和尺寸新增功能说明]]></title>
      <description><![CDATA[ 一、新增尺寸和文本编辑功能说明     单击工具条中的格式刷或从主菜单进入格式刷功能，会出现如下图所示的立即菜单，选择相应的项进入编辑功能1．尺寸风格编辑功能：统一修改多个尺寸引用风格    在立即菜单中选择“ ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/892.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/892.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:48:01 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA PDM在北奔重庆变速器的成功应用]]></title>
      <description><![CDATA[ 本文作者根据CAXA PDM在北奔重庆变频器的成功应用，认为实施PDM系统不仅仅是提供了一套工作平台，更重要的是理顺了企业的管理流程和规范，以规范化的管理建立企业从上到下的全局意识。 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/891.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/891.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:42:04 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA工艺图表2007新增功能介绍]]></title>
      <description><![CDATA[ 一、CAXA工艺图表2007新增功能 

1、包含电子图板2007最新的基本功能 

2、插入图片功能 

新增对图片(jpg格式)的支持，并能直接在图片上加上标注，大大提高了编制工艺的高效与快速性。 

3、拾取显示 

改 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/890.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-04-03/890.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Fri, 03 Apr 2009 05:35:31 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA电子图板V2与AutoCAD之间的图形转换]]></title>
      <description><![CDATA[ CAXA电子图板V2是一套高效、方便、智能化的二维设计和绘图软件。它功能强大、易学实用，目前已广泛应用于机械、电子、航空、航天、汽车、船舶、轻工、纺织、建筑等领域，CAXA电子图板V2是CAXA电子图板的最新版本，它 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/553.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/553.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:07:59 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA电子图版介绍]]></title>
      <description><![CDATA[ CAXA电子图板是北航海尔软件公司推出的一套高效、方便、智能化的二维设计和绘图软件。XPr2是CAXA电子图板的最新版本，它在继承CAXA电子图板V2及XP诸多优点的基础上又有了质的飞跃。它具有以下特点；低成本运行环境， ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/552.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/552.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:07:35 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA工艺图表/工艺汇总表2007新增功能]]></title>
      <description><![CDATA[ 一、CAXA工艺图表2007新增功能 

1、包含电子图板2007最新的基本功能 

2、插入图片功能 

新增对图片(jpg格式)的支持，并能直接在图片上加上标注，大大提高了编制工艺的高效与快速性。 

3、拾取显示 

改 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/551.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/551.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:06:20 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA经验谈问答]]></title>
      <description><![CDATA[ 如何确定三维坐标！ 
      内容: 三维电子图板的三维坐标是如何确定的呢？（1，2，3）这三个坐标中，是不是分别固定的代表X，Y，z值呢？还是根据选择的平面不同，这三个数值所对应的坐标会相应发生改变呢？  
    ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/550.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/550.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:05:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA冷冲模具设计(CAXA-CPD) 专业冲模具设计与绘图软件]]></title>
      <description><![CDATA[ ●产品简介 
冷冲模设计师CAXA -CPD的突出的特点是智能化,免绘图，在设计过程中，设计者仅需从模具的结构、辅助机构、部件的功能、模具零件加工的工艺性等概念上参与设计，而无需直接绘制模具图。全部模具图都是在&amp;quot; ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/549.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/549.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:05:24 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA为汽车制造业插上信息化的翅膀]]></title>
      <description><![CDATA[ 在汽车制造业的强劲带动下，我国制造业正在迎来蓬勃发展的春天。 
    一、 CAXA在一汽集团设计、制造与管理信息化中的应用  
  
　　长春齿轮厂是一汽轿车股份有限公司的直属专业厂。工艺设计以前是使用WORD、AU ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/548.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/548.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:05:02 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[CAXA 实体设计软件概况]]></title>
      <description><![CDATA[ CAXA实体设计2006独一无二地将可视化的自由设计与精确设计手段结合在一起，使产品设计跨越了传统参数化造型CAD软件的限制，支持产品从概念设计至详细设计，最终生成符合国家标准的二维图纸的全过程。 
    CAXA实体 ]]></description>
      <link>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/547.html</link>
      <guid>http://www.ugproe.com/article/soft/sj/caxa/2009-02-12/547.html</guid>
      <category>CAXA</category>
      <author><![CDATA[佚名]]></author>
      <pubDate>Thu, 12 Feb 2009 15:04:31 +0000</pubDate>
    </item>
  </channel>
</rss>